Confirmation With Epson Rc+ (Rs-232C); Rs-232C Software Communication Setup (Rs-232C) - Epson RC700-D Manual

Functions 14. Option Slots

14.4.3 Confirmation with EPSON RC+ (RS-232C)

When an RS-232C board is mounted in as option unit, the Controller software automatically identifies the RS-232C
board. Therefore, no software configuration is needed. Correct identification can be confirmed from EPSON RC+.
(1) Select the EPSON RC+ 7.0 menu-[Setup]-[System Configuration] to display the
(2) Select the [RS232]-[CU].

14.4.4 RS-232C Software Communication Setup (RS-232C)

Available communication settings are as follows.
Baud Rates
Data bit length
Stop bit length
Parity
Terminator
Refer to EPSON RC+ 7.0 Online Help or Users Guide – 13. RS-232C Communications for RS-232C communication
from the Robot application.
150
[System Configuration] dialog.
Item Specification
110, 300, 600, 1200, 2400, 4800, 9600,
14400, 19200, 38400, 57600, 115200
7, 8
1, 2
Odd, even, NA
CR, LF, CRLF
RC700-D Rev.2