Table of Contents
Advertisement
Installation 4. First Step
(6) Step 3 window is displayed.
(7) Firmware installation starts.
60
(6)-1 If the [Disable connection password] checkbox is selected, connection
authentication after updating the firmware is disabled.
(6)-2 If the <Install> button is clicked, the confirmation window is displayed.
When the [Disable connection password] checkbox is selected:
When the [Disable connection password] checkbox is not selected:
When the <OK> button is clicked, Step 4 window is displayed. Go to the step (7).
When the <Cancel> button is clicked, the window is closed.
When the firmware is installed, click the <Next> button. Reboot the Controller.
RC700-D Rev.2
Advertisement
Table of Contents
