Table of Contents
Advertisement
Thermo Scientific
Warnings and Cautions
Section 1
Ignoring the following warnings could cause serious injuries or even fatal
accidents.
Check and connect properly -the voltage, phase and capacity of power
supply on the ID plate before installation.
Power supply must be properly grounded. Abnormal grounded connection
causes serious damage. Grounded connection must not be on the water
pipe and gas pipe.
Use correct and provided power cord.
Do not install the product in the place that the gas could leak out. Do not
use in a place that has industrial oil smoke and metallic dust. It causes
fire or electric shock.
Do not use the machine near places where explosion can occur due to
organic evaporating gases.
Explosive materials: Acid, Esther, Nitro compound
Inflammable materials: salt peroxides, inorganic peroxide, salt acids.
Check equipment for permissible environmental conditions when used
inside Temp. & Humid. Chamber or Incubator. It can be cause of fire or
trouble by shaker electricity, electronic, and damage of motor.
Shaker Permissible environmental condition; Temperature 2°C to 60°C,
Maximum relative humidity 80%.
Wear your personal protective equipment in accordance with the hazard
category of the medium to be processed. Splashing liquids, projectile
parts, body parts, hair, clothing and jeweler getting caught.
Unplug, when there is strange sound, smell and smoke from the product.
Stop operating and request service.
Keep out of the direct sunlight. It may influence that product life and
operation properly.
Do not use the machine at places where moisture is high and flooding can
be happened.
Do not assemble, repair, modify on your own. The product may not work
well and electric shock change the efficiency of the product. Also this
will void the warranty.
MicroPlate Shaker
1-1
Advertisement
Table of Contents
