Table of Contents
Advertisement
5.1.4 Memory Extension Mode Tab
This tab enabled only when the MCU tab in the Init dialog is used to specify the MCU file of the
microcomputer (M16C/62 group) which supports the memory space expansion function.
The specified data remains effective for the next start. In this tab, only the debugger for M16C/R8C
exists.
5.1.4.1 Select the Memory Space Extension Mode
Select the memory space extension mode.
•
When you use a normal mode, Please click the "Normal" radio button.
•
When you use extension mode 1, Please click the "Mode1" radio button.
•
When you use extension mode 2, Please click the "Mode2" radio button.
The data of the eighth line of the selected MCU (data which specifies whether or not memory
extension mode is required) is used to determine whether or not memory extension mode has to be
selected.
If the eighth line contains a '1', The memory extension mode selection area is active. If the line
contains a '0' or nothing, the memory extension mode selection area is inactive.
40
Advertisement
Table of Contents
