5.1 Init Dialog
The Init dialog box is provided for setting the items that need to be set when the debugger starts up.
The contents set from this dialog box are also effective the next time the debugger starts. The data set
in this dialog remains effective for the next start.
The tabs available on this dialog box vary with each product used. For details, click the desired tab
name shown in the table below.
Tab Name
MCU
Debugging Information
F/W and Work Area
Memo
ry Ext
ension Mode
Clock
Script
You can open the Init dialog using either one of the following methods:
•
After the debugger gets started, select Menu - [Setup] -> [Emulator] -> [System...].
•
Start Debugger while holding down the Ctrl key.
5.
Setup the Debugger
Product Name
The
debugger
for M32C
Exist
Ex ist
---
---
Exist
Exist
33
The debugger for
The debugger for 740
M16 /R8C
C
exist
exist
exist
exist
exist
---
exist
---
exist
exist
exist
exist
5 Setup the Debugger