Setup The Debugger For M16C/R8C; Map Command - Renesas Emulator Debugger M16C PC4701 User Manual

5.4 Setup the Debugger for M16C/R8C

5.4.1 Map Command

The memory map information must be altered to suit the target microcomputer's memory space by
Map command.
Area Mapping
SFR External
Internal RAM Internal
Internal ROM Internal
External ROM External
Note
• The emulator temporarily uses the area from FFCh to FFFFh as a stack. Set this area as
Internal. If you want to set this area to External be sure to prepare read-/write-unprotected
memory for the area.
• When using the memory space expansion function on the M16C/62 Series microcomputer, set the
areas whose addresses are duplicated to External. (The duplicated area depends on memory.)
- Memory space expansion mode 1: 4000h to 2FFFFh
- Memory space expansion mode 2: 40000h to BFFFFh
Note
Memory Expansion Mode, Microprocessor Mode
54