Time Measurement Condition; Command Button - Renesas Emulator Debugger M16C PC4701 User Manual

7.10.2 Time Measurement Condition

For the time measurement conditions, the following can be specified for each measurement interval.

7.10.3 Command Button

The buttons on this window has the following meanings.
Butto n Function
Reset Discards the contents being displayed in the window and loads contents from the
emulator in which they were set.
Save... Saves the contents set in the window to a file.
Load... Loads event information from a file in which it was saved.
Set Sends the contents set in the window to the emulator.
Close Closes the window.
Measures the time in an interval from where the start event is
established till where the end event is established.
Measures the time from where an event is established till where
the next event is established.
Measures the time from where an event is established till where
the event is not established.
Measures the execution time of functions. The start address and
the end address of the function are automatically registered for
the start event and the end event, respectively.
The measurement result includes the execution time of other
functions that have been called from within the specified
function.
Measures the execution time of functions. The start address and
the end address of the function are automatically registered for
the start event and
measurement result does not include the execution time of other
functions that have been called from within the specified
function.
164
the end event, respectively. The