Specify The Event Combination Condition - Renesas Emulator Debugger M16C PC4701 User Manual

7.7.10 Specify the Event Combination Condition

Use the Combination group of the event setting windows to specify the combinatorial conditions of
events.
The combination of two or more events can be used.
One of the following combinatorial conditions can be selected.
AND
AND(Same Time)
OR
STATE TRANSITION
Pass counts (number of times passed) can be specified for each event (1-255). If the specified
combinatorial condition is AND (Same Time), no pass counts can be set (fixed to 1).
7.7.10.1 Select AND, OR
Change the Combination group to "AND" to specify AND for the combinatorial condition, or "OR" to
specify OR for the combinatorial condition. Next, check (turn on) an event in the event specification
area that you want to use, and specify a pass count for that event. To alter the pass count, while the
event to alter is being selected, click the pass count value of that event.
All of the specified events are established
The specified events are established at th same time
One of the specified events is established
Established upon entering a break state in the state transition diagram
142
e