Table Of Script Commands; Table Of Script Commands (Classified By Function); Execution Commands; File Operation Commands - Renesas Emulator Debugger M16C PC4701 User Manual

The following script commands are prepared.
The commands with yellow color displaying can be executed at run time.
The command to which "

8.1 Table of Script Commands (classified by function)

8.1.1 Execution Commands

Command Name
Go
GoFree
GoProgramBreak*
GoBreakAt*
Stop
Stat s u
Step
StepInstruction
OverStep
OverStepInstruaction
Return
ReturnInstruction
Rese t
Time

8.1.2 File Operation Commands

Command Name S ort Name h
Load L
LoadHex LH
LoadMot* LM
LoadSymb l o LS
LoadIeee* L I
Reload -
UploadHex UH
UploadMot* UM
8.

Table of Script Commands

" adheres behind is not supported according to the product.
*
Short Name Contents
G Program execution with brea points
GF Free run program execution
GPB Run target program with software break point
GBA Run target program with
- Stops program execution
- Checks the operating status of the MCU
S Halts for user input until the specified time has elapsed
S I Step execution of instructions
O Overstep execution of source lines
OI Overstep execution of instruct ns
RET Executes a source line return
RETI Executes an instruction return
- Resets the target MCU
- Sets the run time display and checks the current setting
Contents
Downloads the target program
Downloads an Intel HEX-format file
Downloads a Motorola S-format file
Loads source line/ASM symbol information
Downloads IEEE-695 absolute-format files
Re-downloads the target program
Outputs data to an Intel HEX-format file
Outputs data to a Motorola S-format file
so
239
8 Table of Script Commands
k
ftware break point
io