Protect Window; Extended Menus - Renesas Emulator Debugger M16C PC4701 User Manual

7.8 Protect Window

The Protect window sets the protect break (memory protect) function of the emulator.
•
The protect break function is disabled at start of the debugger.
•
Three types of protect break attributes are provided as below:
- Access Disable (read/write disabled, display in red)
- Read Only (write disabled, display in yellow)
- R/W Enable (read/write enabled, display in sky blue)
•
The protect break area is a 256 KB continuous area starting from the 64 KB boundary.
•
You can use the following two methods to set protect break.
- Specify from the target program session information.
- Specify the memory attribute of the desired address range.

7.8.1 Extended Menus

This window has the following popup menus that can be brought up by right-clicking in the window.
Menu
Section
Base Address...*
Attribute...
Mode
Toolbar display
Customize toolbar...
Allow Docking
Hide
*:The debugger for 740 doesn't support, because the entire memory area is protection area.
Function
Set protect break attribute by the section information.
Change protect base address.
Set protect break attribute.
Switch enable or disable protect break function.
Display toolbar.
Open toolbar customize dialog box.
Allow window docking.
Hide window.
146