Display The Alarm Handler Status - Renesas Emulator Debugger M16C PC4701 User Manual

7.14.10 Display the Alarm Handler Status

In the MR window, select Popup Menu - [Mode] -> [Alarm Handler].
When the realtime OS is MRxx conformed to uITRON specifications V.3.0, the following data is
displayed in the status bar.
7.14.10.1 Display the Alarm Handler Status(When the realtime OS is MRxx conformed to uITRON
specifications V.3.0.)
Of all the cycle start handlers defined in the configuration, only those which are not started yet at
present are listed in the ascending order of start time. The function of each item is listed below.
(When the realtime OS is MRxx conformed to uITRON specifications V.3.0.)
Item
ID
StaAddr
(name)
AlarmTime
7.14.10.2 Display the Alarm Handler Status(When the realtime OS is MRxx conformed to uITRON
specifications V.4.0.)
Of all the cycle start handlers defined in the configuration, only those which are not started yet at
present are listed in the ascending order of start time. The function of each item is listed below.
(When the realtime OS is MRxx conformed to uITRON specifications V.4.0.)
Item
ID
Name
Almtim
Status
•
The following are displayed in the Status area:
TALM_STA
TALM_STP
Contents
ID No. of alarm handler
Starting address of alarm handler
Name of alarm handler
Starting time of alarm handler
Contents
ID No. of alarm handler
Name of alarm handler
The amount of time by the millisecond remaining before the alarm
handler's activation time
Activity status of alarm handler
Alarm handler is in an operational state
Alarm handler is in a non-operational state
204