Specify The Events (External Trigger Signal) - Renesas Emulator Debugger M16C PC4701 User Manual

7.7.9 Specify the Events (External Trigger Signal)

To specify an event for external trigger signal, change Event Type in the event select dialog box to
"TRIGGER". When the signal from the external trace signal input cable is in a specified state, the
event is established. Rising/falling edges are detected from the signal on the external trace signal
input cable included with the emulator (A combination of eight signals is possible.).
The following shows the names of signals from the external trace signal input cable and their cable
colors.
Signa Name l
EXT0
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
EXT7
GND
7.7.9.1 Detection of Rising/Falling Edge
Set as below. By clicking each trigger button, its trigger setting changes in the order of "H" -> "L" -> "
".
Example) Rise of EXT0 (white) signal
Cable Color
White
Brown
Red
Orange
Yellow
Gree n
Blue
Purpl e
Black
140