Notes For Coverage Function; Emulator Reset Switch; Debugging Resource On Emulator - Renesas Emulator Debugger M16C PC4701 User Manual

12.1.10 Notes for coverage function

Coverage Measurement is a function to record the addresses accessed by the target program.
These accessed addresses will flow to the microcomputer address bus.
This may cause unexecuted addresses to be treated as executed addresses when calculating coverage.

12.1.11 Emulator reset switch

If system reset of the emulator does not function normally, terminate the debugger, turn ON the
emulator again, and restart the debugger.
Then re-download the program.

12.1.12 Debugging Resource on Emulator

The debugging resource on the emulator is shared the window/between the dialogs plurals.
Therefore, either of the window/the dialog which can be used at the same time is only one.
•
Trace Event Trace Point Setting Window(TracePoint Command)
• MR Trace Window/MR Analyze Window
• Task Trace Window/Task Analyze Window
• Time Measurement Window
267
12 Attention