Extended Menus - Renesas Emulator Debugger M16C PC4701 User Manual

ATTENTION
Task pause function uses the address match interrupt of the MCU.
Don't use this function when the target program uses the address match interrupt.
If you use PC7501 emulator, this function is not available when you use address match inturrpt break
function.

7.17.2 Extended Menus

This window has the following popup menus that can be brought up by right-clicking in the window.
Menu Function
Task Pause
Come-pause
Unpause
Display Source/Function...
Address...
Program Counter
Mode Source
Mixed
Disassembly
Layout Line
Address
Code
Tab...
Toolbar display
Customize toolbar...
Allow Docking
Hide
Operation in the MR task pause window is as follows when the program display location is changed
*
by PC position specification.
•
When the target task selected in the task pause display area is paused
-> Its display position is changed to the context PC position of the task.
• When the target task selected in the task pause display area is in a state other than "pause"
-> The display position is not changed.
• When the target task is selected from the task pause display area
-> The display position is changed to the position from the current program counter (in the same
manner as the operation in the Source window).
Make the selected task in the PAUSE state.
Make the selected task in the PAUSE state just before executing
the code at the cursor in the program display view.
Make the selected task out of the PAUSE state.
Displays the begining of the specified file/function.
Displays the program from the specified address.
Displays the program from the current program counter value.
*
Switches the view to the source mode.
Switches the view to the mixed mode.
Switches the view to the disassembly mode.
Shows/Hides the line number column.
Shows/Hides the address number column.
Shows/Hides the line code column.
Changes Tab number.
Displays the toolbar.
Opens the toolbar customize dialog box.
Allows the window docking.
Hides the window.
224