Table of Contents
Advertisement
The grid lines are displayed using the start marker as the radix point.
The scale is displayed, using the time at which the start marker is positioned as 0, with the left
(forward in time) set to "minus" and the right (backward in time) set to "plus".
The grid lines allow you to roughly understand the interrupt occurrence cycle and process time.
The interval time width of the displayed grid lines appears in the "Grid" area of the status bar.
The time value in the Task Trace window means the execution elapsed time using the program
execution start time as 0 in all the cases.
On the contrary, the numeric value above the grid lines (scale) in the Task Trace window is a relative
value using the start marker as 0 (the grid interval is specified in the Value dialog). It has nothing to
do with the time value. (This is provided so that you can see the window easily.)
7.18.1 Extended Menus
This window has the following popup menus that can be brought up by right-clicking in the window.
Menu
Start Marker
End Marker
Indicator
Adjust
Expand
Reduce
Trace Stop
Trace Restart
Trace Range
After
Break
Value...
Color...
RTOS...
Toolbar display
Customize toolbar...
Allow Docking
Hide
Function
Move the start marker in the display area.
Move the end marker in the display area.
Move the indicator in the display area.
Adjust range of start and end marker to full width of display area
Adjust.
Increase scale factor of display.
Decrease scale factor of display.
Stop measuring.
Restarts measuring.
Set measurement range condition to After.
Set measurement range condition to Break.
Set value.
Change display color.
Set target RTOS information.
Displays the toolbar.
Opens the toolbar customize dialog box.
Allows the window docking.
Hides the window.
231
7 Windows/Dialogs
Advertisement
Table of Contents
