Step 5: execute the exposure
Press the exposure button to execute the exposure.
At the NX workstation:
• While the acquisition is ongoing, the thumbnail status indicator is
flashing green. The image is acquired from the DR detector and
displayed in the thumbnail.
• If collimation is applied, the image is automatically cropped at the
collimation borders.
Instruction: Make sure the generator is ready for exposure
before you press the exposure button.
Warning: The radiation indicator on the control console
lights up during exposure release.
Warning: Do not select another thumbnail until the
preview image is visible in the active thumbnail.
DX-D 40C, DX-D 40G | Getting started | 63
0290A EN 20140626 1622