Cables, Transducers And Accessories - AGFA Valory User Manual

210 | Valory (system with floor mounted column) | Product Information

Cables, transducers and accessories

Cables, transducers and accessories which were tested and found to comply
with the collateral standard IEC60601-1-2 (EMC):
Unless noted otherwise, available cable lengths are 16 m, 20 m and 24 m.
Table to control box Type / connector / maxi-
Foot pedal (optional) UL2464SB 6x AWG20
Main power cable
Table to gen-
erator
AEC
Control box to op-
erator room
COM A
COM B
LAN connection to
the system
0426A EN 20220804 1858
CAUTION:
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and
result in improper operation.
mum length (m)
VCTF Cable 1.5SQ*3C
Type / connector / maxi-
mum length (m)
CAT5e/CAT6 SFTP 20 m
Type / connector / maximum
length (m)
3 x AWG24 9p D-SUB BU/BU 20
m
Standard RS-232 cable (9 Pin D-
SUB) 20 m
CAT 5e SF/UTP or F/UTP 20 m
Remark
part of the switch
(Agfa service)
unschielded
Remark
internal basic wiring (Agfa
service)
A611881
Remark
basic wiring; at-
tention cross link
basic wiring
basic wiring