Parameter
Parity
Access rights
Communication supervision
time
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Enter the activation password (refer to
•
Click Activation.
Configuration via Display
2.7.1.3
Submenu Modbus RTU (Slave) Settings
The operation is carried out with the softkeys F1 to F4.
[dw_submenu_serial_communication_p85x, 1, en_US]
Figure 2-36
Table 2-22
Parameter
Bus protocol
Device address
Baud rate
Parity
Access rights
Communication supervision
time
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
Default Setting
Even
Full
600 * 100 ms
Submenu Communication via Modbus RTU Slave
Settings for Communication Serial, Modbus RTU (Slave)
Default Setting
Modbus RTU
1
19 200 bit/s
Even
Full
600 * 100 ms
Setting Range
None, 1 stop bit
Even
Odd
None, 2 spot bit
Full
Read only
0 s = none
100 ms to 6 553 400 ms
Table
2-3).
Setting Range
None
Modbus RTU
IEC 60870-5-103
1 to 247
1200 bit/s, 2400 bit/s,
4800 bit/s, 9600 bit/s,
19 200 bit/s, 38 400 bit/s,
57 600 bit/s, 115 200 bit/s
None, 1 stop bit
Even
Odd
None, 2 spot bit
Full
Read only
0 s = none
100 ms to 6 553 400 ms
Basic Functions
2.7 Serial Communication
(slave)
75