Siemens SICAM 7KG85X Manual page 151

Power Quality
6.8 EN 50160 Report
NOTE
i
i
The factory settings are based on EN 50160. If you have changed the settings, the set parameters are
applied after a device restart. It is possible to reset to the factory settings.
Value View of the EN 50160 Report
To display the EN 50160 report in the Value view tab, proceed as follows:
•
In the navigation window, click EN 50160 report.
[sc_q200_PQ_Report_evalu, 3, en_US]
Figure 6-28
•
Edit the text box directly or select the Start time and End time from the calendar.
•
Select a report from the Report list.
•
Click Generate report.
The report is displayed in a separate window and can be printed out or saved.
150
Value View Tab, EN 50160 Report
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022