Siemens SICAM 7KG85X Manual page 143

Power Quality
6.6 Measurement Records
Table 6-18
Parameter
Average intervals - Frequency
Short term flicker
Long term flicker
Average interval - Voltage /
Unbalance / THDS / Harmonics
Record additional data (I, P, Q,
S etc.)
Recorder of average - Min
Recorder of average - Max
Harmonics
File generation every:
(corresponds to the setting of
the Average interval parameter)
The created PQDIF files can be
downloaded via the Web pages
or the IEC 61850 protocol.
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Enter the activation password (refer to
•
Click Activation.
Value View of the Measurement Records
To display the measurement records in the Value view tab, proceed as follows:
•
In the navigation window, click Records.
•
Configure the respective parameters in the list boxes according to the following tables.
Table 6-19
Parameter
Record type
Start time
End time
Measurement source
Measurements
142
Settings for Measurement Records (only SICAM P855)
Default Setting
10 s
10 min
2 h
10 min
no
no
no
Odd
24 h
Settings for Viewing the Measurement Records
Default Setting
Measurement records
Current time
Not settable
One hour after Start time
Frequency 10 s
f - 10 s
Setting Range
fixed
fixed
fixed
1 min
10 min
no
yes
no
yes
no
yes
Even
Odd
All
At average interval:
1 min
10 min
Table 2-3).
Setting Range
Trend records
Measurement records
Measurement Records
Any with calendar function Time format:
depends on date/time format config.
Acc. to list box
The selectable Measurements depend on the
selected Measurement Source.
File generation every:
2 h (fixed)
2 h
24 h
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022