Advanced Functions; Process Connections; Binary Outputs; Leds - Siemens SICAM 7KG85X Manual

13.3

Advanced Functions

Process Connections

13.3.1
13.3.1.1

Binary Outputs

Table 13-12
Parameter
Source type
Source Type Indication
23
Indication
Source inverted
(can be set individually for all
relay outputs)
Operating mode
(can be set individually for all
relay outputs)
Output time for pulse operating
mode (setting only possible for
operating modes Pulse and
Pulse with retrigger)
Source Type Energy Counter
Energy counter
Energy increase per pulse
Output time for pulse operating
mode
13.3.1.2

LEDs

Table 13-13
Parameter
RUN
ERROR
If you select -none- as the source of an indication or energy counter, the corresponding binary output is inactive.
23
24 If you have selected one of the 2 Pulse types in the Operating mode list box, enter an output time x (in x *10 ms) in the Output
time for pulse operating mode field.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
Settings for Binary Outputs
Default Setting
Indication
-none-
No
Persistent
24
20 (* 10 ms)
-none-
23
1.00 Wh
20 * 10 ms = 200 ms
Settings for LEDs
Default Setting
Device ready
-none-
Operational Indications and Operating Parameters
13.3 Advanced Functions
Setting Range
Indication
Energy counter
Acc. to list box
No
Yes
Persistent
Persistent with fail safe
Pulse
Pulse with retrigger
50 ms to 3 600 000 ms
Acc. to list box
0.10 Wh/VAh/varh to
1 000 000.00 Wh/VAh/varh
50 ms to 3 600 000 ms
Setting Range
Not settable
Errors are signaled as parameterized (only error
indications can be parameterized).
-none-
Battery failure
Ethernet link error
Time synchronization error
Primary NTP server error
Secondary NTP server
SD card error
269