Configuration And Value View Via Web - Siemens SICAM 7KG85X Manual

Measured Quantities
Q1b
Q1c
Q1
Further Measured Quantities
Flicker
Harmonics
•
Interfaces: protocols IEC 61850 (PQDIF depending on the measuring interval) and Modbus TCP
Intervals of Aggregation Data and PQDIF Files
The intervals of aggregation data are defined according to the parameter Aggregation interval. The intervals
of PQDIF files are defined according to the parameter File generation interval.
6.6.2 Configuration and Value View via Web Pages
Configuration of the Measurement Records
To change the settings of the measurement records in the Configuration tab, proceed as follows:
•
In the navigation window, click Recorder parameters.
[sc_config_recorder_parameters, 1, en_US]
Figure 6-24
NOTE
i
i
The voltage is recorded in the following network types:
•
1-phase network
•
3P4W (3 phases/4 wires): balanced and unbalanced
•
3P3W (3 phases/3 wires): balanced, unbalanced (2 * l), and unbalanced (3 * l)
•
Configure the respective parameters according to the following table.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
See chapter
See chapter
Configuration Tab, Measurement Records
AVG Max. Value
PQDIF
x
x
x
6.2 Flicker
2.5.4.2 Harmonics
Power Quality
6.6 Measurement Records
Min. Value
x x
x x
x x
141