Get Default Configuration - Siemens SICAM 7KG85X Manual

Commissioning and First Steps
9.11 Operation via PC
Message Logs Menu – Operational Log
The Message Logs menu contains operational indications registered and saved by the device during opera-
tion. The device can save up to 128 operational indications. When the storage capacity is exceeded, the oldest
indications will be overwritten successively.
To show the operational indications, proceed as follows:
•
In the navigation window, click Operational log:
[sc_Operational_log, 2, en_US]
Figure 9-29
NOTE
i
i
The chapter 2.8.2 Viewing and Clearing of Message Logs
tions manually.
9.11.2.9

Get Default Configuration

NOTE
i
i
The device contains 2 sets of parameters. The set of parameters currently used for device operations is the
active set of parameters. The inactive set of parameters is called the passive set of parameters.
If you have not changed the settings of the parameters since the first start of the device, you use the default
settings.
If you have changed the settings of the parameters, and need to get the default configuration that is set at the
factory, proceed as follows:
•
In the navigation window of the Configuration tab, click Get default configuration.
224
Information Tab, Operational Log
explains how to delete the operational indica-
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022