Starting Operation - Siemens SICAM 7KG85X Manual

Commissioning and First Steps
9.10 Operation via Display
Softkey Functions
Exiting edit mode
Increasing the displayed value or switching forward in
the parameter list in edit mode
Reducing the displayed value or switching backward in
the parameter list in edit mode
Switchover the sign
Switching between selected and non-selected state (for
example, password protection on → password protec-
tion off)
Table 9-4
Icon
9.10.2

Starting Operation

Before starting the device, the following preconditions must be met:
•
Mount the device as described in chapter
•
Connect the lines for measurement, communication and supply voltage as described in the chapters
9.5 Electrical
safety notes.
•
Switch on the devices needed for the measurement.
•
Switch on the supply voltage of the device.
•
Check whether the LEDs indicate that the device is ready (see chapter
Once the device is initialized, the currently selected screen with the measured values is displayed.
NOTE
i
i
The following figures only show the display without the front view of the device.
212
Icons in the Title Bar of the Display
Definition
The device is password-protected.
The device password was entered correctly and the device is unlocked.
Connection, 9.7 Communication
F1
9.3 Assembly.
Connections, 9.8 Binary Connections
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
F2 F3
and observe the
10.1.3 LED Indications).
F4