Configuration And Value View Via Web - Siemens SICAM 7KG85X Manual

Automation Functions
4.2 Group Indications
[dw_p85x_regular_2x_1, 1, en_US]
Figure 4-6
Configuration and Value View via Web Pages
4.2.2
Configuration of the Group Indications
To change the settings of the group indication in the Configuration tab, proceed as follows:
•
In the navigation window, click Group indications 1-4.
[sc_Group_indication_configuration, 5, en_US]
Figure 4-7
•
Configure the respective parameters according to the following table.
Table 4-3
Parameter
Source
Only the indications for the
parameterization of the binary
outputs are displayed which
can be used according to the
current device settings.
Source inverted
96
Example: Linking 2 Indications to a Group Indication
Configuration Tab, Group Indications
Settings for Group Indications
Default Setting
-none-
No
Setting Range
Acc. to list box
Limit violation and group indication:
Designation can be changed during the parame-
terization.
No
Yes
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022