Automation Functions; Limit Violation 1-8 And 9-16; Group Indications 1-4 - Siemens SICAM 7KG85X Manual

Operational Indications and Operating Parameters
13.3 Advanced Functions
Parameter
H1
H2
Only the indications for the
parameterization of the binary
outputs are displayed which
can be used according to the
current device settings.
Indication inverted
13.3.2

Automation Functions

13.3.2.1

Limit Violation 1-8 and 9-16

Table 13-14
Parameter
Measurement
Limit
Limit type
Hysteresis (%)
Violation indication
13.3.2.2

Group Indications 1-4

Table 13-15
Parameter
Source
Only the indications for the
parameterization of the binary
outputs are displayed which
can be used according to the
current device settings.
Source inverted
Logic operation
Group indication name
25 The limit value must be the primary value.
270
Default Setting
-none-
No
Settings for Limits
Default Setting
-none-
25
0.00
Lower
1.00
Limit Violation x
(x = 1 to 16)
Settings for Group Indications
Default Setting
-none-
No
NONE
Group Indication x
(x = 1 to 4)
Setting Range
Acc. to list box
Limit violation and Group Indication
Designation can be changed during the parame-
terization.
No
Yes
Setting Range
Measured value selection list depending on
network type
-1 000 000 000.00 to 1 000 000 000.00 (unit)
Lower
Upper
0.00 to 10.00
The name of the indication is customizable;
max. 31 characters.
Setting Range
Acc. to list box
Limit violation and group indication:
Designation can be changed during the parame-
terization.
No
Yes
NONE
OR
AND
The name of the indication is customizable;
max. 31 characters.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022