[sc_Get_device_configuration, 2, en_US]
Figure 9-30
The factory settings (= passive set of parameters) are restored, and the status of the "parameter set for config-
uration" changes from "equal to active" to "modified".
9.11.2.10
Open Configuration from File
If you have selected Open configuration from file in the Configuration tab, you can open an existing file in a
folder.
Proceed as follows:
[sc_Open-configuration-from-file, 3, en_US]
Figure 9-31
•
Click Choose file.
•
Select the desired file (extension .cfg) in the directory.
NOTE
i
i
The file name has the following restrictions:
•
Maximum 8 characters
•
Only containing:
–
Letters: a to z, A to Z
–
Numbers: 0 to 9
–
Hyphen (-) and underline (_)
•
Click Open.
The selected path is inserted in the Browse field,
•
Click Open.
The device configuration from the CFG file is loaded.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
Configuration Tab, Get Default Configuration
Configuration Tab, Open Configuration from File
Figure
9-31.
Commissioning and First Steps
9.11 Operation via PC
225