1Gbps SFP and 10Gbps SFP+ Ports
The XS916MX Switches have ports for 1Gbps SFP or 10Gbps SFP+
transceivers.The AT-XS916MXT Switch has four ports and the
AT-XS916MXS Switch has twelve ports. Transceivers are used to connect
the switches to other network units over large distances, build high-speed
backbone networks between network devices, or connect high-speed
devices, such as servers, to your network.
Examples of 1Gbps SFP transceivers include:
AT-SPSX and AT-SPEX transceivers using multi-mode fiber optic
cable, for distances up to 550 meters and two kilometers,
respectively.
AT-SPLX10 and AT-SPLX40 transceivers using single-mode fiber
optic cable, for distances up to 10 and 40 kilometers, respectively.
Examples of 10Gbps SFP+ transceivers include:
AT-SP10SR, LR, ER, and ZR series of short or long distance
transceivers using multi-mode or single mode fiber optic cable.
AT-SP10LRM Long Reach Multimode transceiver for OM1 multi-
mode fiber optic links up to 220 meters.
AT-SP10TW1 and AT-SP10TW3 Direct Attach Cables in lengths of
one and three meters, respectively.
Note
Industrial (-40 to 85° C) temperature transceivers are available.
Note
SFP/SFP+ transceivers are purchased separately.
Note
The XS916MX Switches do not support the AT-SP10TW7 Direct
Attach Cable.
XS900MX Series Installation Guide for Stand-alone Switches
21