Table of Contents
Advertisement
Ports for 1Gbps SFP, 10Gbps SFP+, or SP10TM Transceivers
SFP and SFP+
Transceivers
Ports 1 to 24 on the x950-28XSQ switch and ports 1 to 48 on the
x950-52XSQ switch support 1Gbps SFP, 10Gbps SFP+ transceivers.
Listed here are examples of 1Gbps SFP transceivers:
SPSX and LR short and long distance transceivers using
multi-mode or single mode fiber optic cable.
SPTX transceiver series with RJ-45 connector for twisted pair
cable.
SPEX transceivers with a maximum distance of two kilometers with
multi-mode fiber optic cable.
Listed here are examples of SFP+ 10Gbps transceivers:
SP10SR, LR, ER and ZR series of short or long distance
transceivers using multi-mode or single mode fiber optic cable.
SP10TW series of direct attach cables in lengths up to seven
meters.
SP10BD series of bidirectional transceivers for single mode fiber
optic cable with maximum distances of 10 to 40 kilometers
SP10T transceiver with RJ-45 connector for links up to 20 meters
at 10Gbps with Category 6a twisted pair cable, or 100 meters at
1Gbps.
SP10LRM Long Reach Multimode transceiver for OM1 multi-mode
fiber optic links up to 220 meters.
SP10TM transceiver with RJ-45 connector for links up at
1/2.5/5/10Gbps.
Note
Industrial (-40 to 85° C) and extended (-40 to 105° C) temperature
transceivers are available.
Here are transceiver guidelines:
The ports do not support 100Mbps-FX transceivers.
They support full-duplex mode only.
You can set the port speeds with Auto-Negotiation or manually.
The default is Auto-Negotiation.
Transceivers must be purchased separately. For a list of supported
transceivers, refer to the product data sheet on the Allied Telesis web site.
x950 Series Installation Guide for Standalone Switches
19
Advertisement
Table of Contents
