Using The Menu System - Barco ACS-2048 User Manual

4. Operation

Using the Menu System

rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using ACS-2048's menu system. For
reference, the figure below illustrates the Main Menu:
A C S - 2 0 4 8 M A I N M E N U
> I n A u t o A c q u i r e
Figure 4-6. Main Menu Display
Please note the following important menu rules and conventions:
•
•
•
•
•
•
•
•
36
Inpu t
Output
The top line names the current menu, in all capital letters.
Subsequent lines typically display two fields:
~
For a listed function, the left-hand field names the function, and the
right-hand field is the function's current parameter (or value).
~
For a listed sub-menu, the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow (>>),
indicating that a sub-menu is available.
The "navigation" cursor (>) in the left-hand column indicates the current line on
which action can be taken. This arrow "scrolls" as you rotate the knob.
Scrolling:
~
Turn the ADJUST knob counter-clockwise (CCW) to scroll down.
~
Turn the ADJUST knob clockwise (CW) to scroll up.
To enter a sub-menu, scroll to the desired line and press
Note Throughout this chapter, the term "select" is used as an
abbreviation for "scroll to a selected menu line and press the
SEL button."
To change a parameter, scroll to the desired line and press
changes to the "edit" cursor (
~
Turn the ADJUST knob CW to increase a value.
~
Turn the ADJUST knob CCW to decrease a value.
To accept a parameter or value, press
navigation cursor.
Note You must press SEL to activate an ACS-2048 function.
In the "edit" mode, to exit (or cancel) without changing the original parameter,
ESC
press .
O N
>>
>>
Select the Input field to ...
#
). Use the ADJUST knob to modify the value:
SEL
. The edit cursor changes back to the
ACS-2048 • User's Guide
SEL
.
SEL
. The cursor