Table of Contents
Advertisement
Certifications
Teledyne LeCroycertifies compliance to the following standards as of the date of publication. As
standards evolve, these may no longer be current. Seethe Declaration of Conformity shipped with
your product for current certifications.
EMC Compliance
EC Declaration of Conformity - EMC
The current probes meet the intent of ECDirective 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official Journal of the
EuropeanCommunities:
EN 61326-1:2013 EMC requirements for electrical equipment for measurement, control, and
1
laboratory use.
ELECTROMAGNETIC EMISSIONS:
EN 55011/A1:2010 Radiated and Conducted Emissions Group 1 Class A
ELECTROMAGNETIC IMMUNITY:
EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV vertical/horizontal coupling
4
planes
EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-1000 MHz; 3 V/m, 1400 MHz - 2
GHz; 1 V/m, 2 GHz - 2.7 GHz
EN 61000-4-8:2010 Power Frequency Magnetic Field, 3 A/m, 50 Hz; 3 A/m, 60 Hz
1 To ensure compliance with the applicable EMCstandards, use high quality shielded interface cables.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic
interference.
3 Emissions which exceed the levels required by this standard may occur when the probe is connected to a test object.
4 Meets Performance Criteria "B" limits of the respective standard: during the disturbance, product undergoes a
temporary degradation or loss of function or performance which is self-recoverable.
Page 17
2, 3
Advertisement
Table of Contents
