S
AFETY INSTRUCTIONS
Safety Symbols
These safety symbols may appear in the quick start guide or on the
instrument.
WARNING
CAUTION
When you notice any of the unusual conditions listed below,
immediately terminate operation and disconnect the power cable.
Please contact the Teledyne service center representative for repair
of the instrument. If you continue to operate without repairing the
instrument, there is a potential fire or shock hazard for operators.
The instrument is operating abnormally if:
• The instrument emits abnormal noise, smell, smoke, or a spark-
like light during the operation.
• The instrument generates high temperature or electrical shock
during operation.
• The power cable, plug, or receptacle on the instrument is
damaged.
• Foreign substances or liquid has fallen into the instrument.
The following general safety precautions must be observed during
all phases of operation, service, and repair of this instrument.
Failure to comply with these precautions or with specific
WARNINGS elsewhere in this manual may impair the protection
provided by the equipment. In addition it violates safety standards
of design, manufacture, and intended use of the instrument.
Warning: Identifies conditions or practices that
could result in injury or loss of life.
Caution: Identifies conditions or practices that
could result in damage to the instrument or to
other properties.
1