Table of Contents
Advertisement
Attaching the MIX slider / DIC slider for
4
reflected light observation
For attaching procedures, see "4-7 Using the DIC slider" on page 36 or
"4-8 Using the MIX slider for reflected light observation" on page 38.
Attaching the MIX slider for reflected light observation
1
Connect the cable for the MIX slider for reflected light observation
to the connector of the control box (BX3M-CBFM). For details, see
"Connecting cables" on page 74.
2
Set the DIP switch No.4 on the side of the control box (BX3M-CBFM)
to ON (Illumination pattern 2).
OFF
Function/Unit
ON
OFF
Buzzer
ON
Motorized nosepiece
Hand switch for
motorized nosepiece
(BX3M-HSRE)
MIX slider setting
: Factory default setting
SettingΦΦ
The buzzer sound is heard.
The buzzer sound is not heard.
OFF
The switches are always kept
ON
OFF (factory default setting) due
OFF
to no combinations with GX53.
ON
OFF Illumination pattern 1
ON Illumination pattern 2 (for GX53)
GX53
71
Advertisement
Table of Contents
