Table of Contents
Advertisement
a
b
1
46
3
Attaching the eyepiece
1
Insert the eyepiece a into the eyepiece sleeve b until it touches
the end.
NOTE
c
d
· As the binocular tube does not have a positioning groove,
an eyepiece equipped with a positioning pin cannot be
used with this tube.
· When using the eyepiece equipped with the micrometer,
insert the eyepiece into the right eyepiece sleeve. In this
case, attach the eyepiece so that the eyepiece positioning
pin c enters the groove d below the eyepiece sleeve.
· The super widefield eyepiece (SWH10-H) has a
positioning pin. Attach it by inserting the positioning pin to
the positioning groove of the eyepiece sleeve.
Advertisement
Table of Contents
