Introduction - Olympus GX53 Instructions Manual

Introduction

This microscope employs the UIS2 optical systems. If you use an eyepiece, objective or condenser, etc. together with
this microscope, be sure to use those of UIS2 optical system series.
Using inappropriate units restricts the performance.
(There are other units usable with the UIS series. Contact Olympus or refer to the latest catalogs.)
Configuration of instruction manuals
Read all instruction manuals provided with the units you purchased.
The following instruction manuals are prepared for the units to be used with this product.
Manual names
Inverted system metallurgical microscope
(this instruction manual)
BX3M-CB/CBFM
Control box/FM Control box
U-RFL-T power supply for mercury burner /
U-RX-T power supply for xenon burner
TH4 power supply for halogen bulb
GX-SLM Scale slider
U-LGPS LED and LDP light source
BX3M-PSLED LED power supply
Intended use
This product is designed to observe magnified images of samples for industrial applications.
Appropriate samples include semiconductors, electrical components, molded parts or mechanical parts.
Industrial applications include observation, inspection or measurements.
Do not use this product for any purpose other than its intended use.
Reflected light brightfield observation, reflected light darkfield
observation, reflected light differential interference contrast observation,
reflected light simple polarization observation and transmitted light
illumination observation
Control box (BX3M-CBFM)
Connection of the mercury lamp housing with the power supply
Connection of the halogen lamp housing with the power supply
Scale slider (GX-SLM)
Connection of the LED and LDP light source with the liquid light guide, etc.
LED power supply for transmitted light illumination
Main contents
GX53
1