Connecting The Ac Adapter And Power Cord - Olympus GX53 Instructions Manual

b
c
76
9
CAUTION
a
d

Connecting the AC adapter and power cord

With this system, the AC adapter and the power cord must be connected
to up to 2 locations: one location on the microscope frame and one
location on the control box (BX3M-CBFM) or the coded function system
(U-CBS).
· Always use the power cord provided by Olympus. If the
proper power cords are not used, the electric safety and
the EMC (Electro-Magnetic Compatibility) performance
of the product cannot be assured. If no power cord is
provided, please select the proper power cord by referring
to the section "Proper selection of the power supply cord"
at the end of this instruction manual.
· Set the main switch of the microscope frame to
and connect the power cord.
· Connect the power cord plug to the grounded triplex
outlet. If the outlet is not grounded, the electric safety
performance intended by Olympus cannot be assured.
· If the power cords contact a hot area of devices such as
a lamp housing, etc., they could melt and cause electric
shock. Be sure to place the power cords sufficiently apart
from the hot area of the device.
· Cables are vulnerable when bent or twisted. Never subject
NOTE
them to excessive force.
· When inserting or removing the AC adapter plug, hold the
a and c parts and insert straightly.
1
Insert the AC adapter's plug a firmly into the AC adapter jack b of
the microscope frame, control box (BX3M-CBFM) or the coded function
system (U-CBS).
2
Insert the power cord connector c into the connector d of the AC
adapter.
(OFF)