section
F 5
Disassembly of the gearchange mechanism
Refer to the exploded view at the beginning of this section for indications on disassembly and renewal of gearchange
components.
If the bush (5) inside the pedal (2) needs replacing, drive the new bush into place using a press. The bush must be seated 2 mm
below the outer face of the pedal.
Warning
After working on the gearchange mechanism, check the position of the gear pedal.
To adjust the position of the gear pedal, follow the instructions provided in Sect. D 4, Adjusting the position of the gearchange
and rear brake pedals.
Monster 696/696+ - M.Y. 2009 - edition 00
Controls - Devices
5
2
A
B
C
D
E
F
G
H
L
M
N
P
35