Refitting The Clutch Slave Cylinder - Ducati Monster 696 2009 Manual

section
F 2

Refitting the clutch slave cylinder

Grease and refit the clutch pushrod (16) with the two O-rings (17).
Locate the slave cylinder unit (14) in the crankcase and tighten the screws (15) to the specified torque (Sect. C 3, Frame torque
settings).
Locate the hose (6) on the slave cylinder (14), ensuring that the hose end fitting is correctly positioned relative to the slave
cylinder (14).
Warning
An incorrectly positioned hose can cause clutch faults and interfere with moving parts.
Monster 696/696+ - M.Y. 2009 - edition 00
Controls - Devices
16
17
15
14
15
14
B
6
A
B
C
D
E
F
G
H
L
M
N
P
17