Ducati Monster 696 2009 Manual page 105

section
D 5
Throttle body balancing
Connect the Measurement Module cable (3) to the Measurement Module connector on the DDS tester (see paragraph
"Description of the Ducati Diagnostic System tester").
Connect the vacuum/pressure pipes (6) to the connectors (A) and (C) of cable (3) and connect the fittings (7) to the pipes.
Switch on the DDS tester; see the paragraph "Tester power supply".
Enter the "Measurement module" function. Press the "Cylinder synchronisation" icon.
The socket to which the Measurement Module cable (3) is to be connected is indicated on the screen with a capital letter:
A, B or C.
Remove the screws (25) from the cylinder heads and install the fittings (7) in their place.
Monster 696/696+ - M.Y. 2009 - edition 00
Use and maintenance
6
A
3
C
7
25
25
A
B
C
D
E
F
G
H
L
M
N
P
53