Ducati Monster 696 2009 Manual page 532

section
N 8
Seat the flange (13) with the starter clutch in the flywheel (16), aligning the flange locating hole (B) with the flywheel locating
hole (C).
A
When refitting the flange to flywheel, insert a pin or a wrench inside the hole (C) for the rotor flywheel locating dowel (14)
in order to line up the flywheel holes with flange threads. This is a useful tip, as the holes cannot be aligned after having
fitted the flange to the flywheel due to the interference fit.
Orient the flange so that the side with the bevelled edge faces the flywheel.
Fit the locating dowel (14) with the circlip (15) in the flywheel locating hole (C).
B
C
D
E
F
G
H
L
M
N
P
150
Engine
13
16
15
13
B
C
14
16
Monster 696/696+ - M.Y. 2009 - edition 00