section
D 4
Attach a length of transparent plastic tubing to the bleed valve (7) and insert the other end of the tubing in a container placed on
the floor.
Siphon off the fluid from the reservoir (5).
Fill the reservoir (5) with new brake fluid up to the MAX mark.
Operate the brake pedal two or three times to pressurize the circuit.
Hold the pedal pressed down.
Warning
While filling the system, always keep the fluid level above the MIN mark to prevent the formation of air bubbles in the circuit.
Allow the fluid to flow from the bleed valve (7) until it changes colour.
Tighten the bleed valve (7) to the specified torque (Sect. C 3, Frame torque settings) and top up the reservoir fluid level.
Monster 696/696+ - M.Y. 2009 - edition 00
Use and maintenance
7
MAX
5
MIN
7
A
B
C
D
E
F
G
H
L
M
N
P
17