section
D 4
With the valve in the rest position, slide a feeler gauge between the closing rocker arm and the closing shim to measure the
clearance:
Closing rocker arm
Intake:
(B)
Adjusting clearance
0 to 0.05 mm
Checking clearance
0 to 0.20 mm
Exhaust:
(B)
Adjusting clearance
0 to 0.05 mm
Checking clearance
0 to 0.20 mm
If the clearances measured are outside the specified limits, measure the value and adjust as required (Sect. N 4.1, Checking and
adjusting valve clearances).
B
Adjusting the valve clearances
Proceed as described in Sect. N 4.1, Checking and adjusting valve clearances.
Monster 696/696+ - M.Y. 2009 - edition 00
Use and maintenance
A
B
C
D
E
F
G
H
L
M
N
P
13