Refitting The Crankshaft/Connecting Rod Assembly - Ducati Monster 696 2009 Manual

section
N 9.3

Refitting the crankshaft/connecting rod assembly

Install the connecting rod/crankshaft assembly in the crankcase and follow the shimming procedure as described in
Sect. N 9.2, Crankcase assembly: crankcase halves.
Important
Make sure that the connecting rods (5) are correctly positioned in the respective cylinder seats. Incorrect positioning of the
connecting rods at this stage will inevitably lead to the need to re-open the crankcase.
Operation
Refit the clutch assembly
Refit the clutch-side crankcase cover
Refit the engine starter system
Refit the alternator-side crankcase cover
and alternator assembly
Refit the cylinder barrel/piston assemblies N 5, Refitting the cylinder/piston assembly
Refit the cylinder head assemblies and the
timing parts
Refit the lubrication system
Install the engine in the frame
Monster 696/696+ - M.Y. 2009 - edition 00
Engine
5
Section reference
N 6.1, Refitting the APTC clutch
N 6.2, Refitting the clutch-side crankcase
cover
P 3, Electric starting system
N 8, Flywheel - alternator
N 4.3, Cylinder head assemblies:
camshafts
N 2.1, Refitting the oil pump
N 1, Refitting the engine
A
B
C
D
E
F
G
H
L
M
N
P
207