section
N 4.2
Refitting the timing system assembly
A
Refitting the camshaft timing pulleys
Check that the keyway on the end of camshaft is in good condition and without burrs.
Fit one key (C) into the camshaft keyway.
B
C
D
Important
During reassembly, take care that the timing mark "D" on the spacer flange is aligned with the mark "A" on the pulley and
washer.
E
F
G
Fit the assembled pulley (16) onto the camshaft, so that is firmly seated.
Warning
H
Make sure that the Woodruff key is not dislodged.
L
M
N
P
26
Engine
C
B
A
16
Monster 696/696+ - M.Y. 2009 - edition 00