Refitting The Gearchange Mechanism - Ducati Monster 696 2009 Manual

section
N 7.1

Refitting the gearchange mechanism

Position the gearchange mechanism (25) in the chain-side crankcase.
Locate the gearbox drum selector claw in the centre of the drum rollers.
Temporarily fit the gearbox lever (or a service lever) and engage third gear.
Fit the plate 88713.1091 in the claw shaft pins (see figure).
Align the notch that marks the centreline of the fork shaft pawl, with the end of the plate.
Then fit the gearchange mechanism retaining screws (18) and (20) with respective washers (19) and (20) and tighten to the
specified torque (Sect. C 3, Engine torque settings).
Monster 696/696+ - M.Y. 2009 - edition 00
Engine
25
88713.1091
A
A
B
20
18
21
19
B
A
B
C
D
E
F
G
H
L
M
N
P
121