Ducati Monster 696 2009 Manual page 291

section
H 7
Refitting the rear turn indicators
The following operations refer to the left side of the motorcycle, but apply also to the right side.
Insert the wiring and left turn indicator (5) in the fixing hole in the protection (3).
Position the plate (17).
Fit the screws (8) and tighten to the specified torque (Sect. C 3, Frame tightening torques).
Reconnect the turn indicator wiring to the main wiring harness.
Refit the protection (3) to the spray guard (1) and tighten the screws (7) to the specified torque (Sect. C 3, Frame tightening
torques).
Monster 696/696+ - M.Y. 2009 - edition 00
Frame
5
8
17
1
7
3
3
A
B
C
D
E
F
G
H
L
M
N
P
43