Moneris iCT250 Getting Starded Manual page 36

Problem Solution
There is a problem Temporarily switch the terminal to Standalone mode:
with the ECR that is
1. Begin at the WELCOME/BONJOUR screen.
preventing you from
processing
2. Press the
transactions.
3. Press the
4. When the PURCHASE ENTER AMOUNT screen (or the PRE-AUTH ENTER
5. IMPORTANT: Once the problem with the ECR has been resolved, you
The Ethernet icon See the solution for TCP CONNECTION FAILED on page 29.
is not coloured
green.
32 iPP320 Getting Started Guide for the POSPAD Application
key.
The SWITCH TO STD-ALONE MODE? prompt appears.
key to select YES.
AMOUNT screen) appears, your terminal is ready to process
transactions as a standalone device.
must switch the terminal back into Semi-Integrated Mode as
follows:
a. Begin at the PURCHASE ENTER AMOUNT screen (or the PRE-
AUTH ENTER AMOUNT screen).
b. Press the key.
c. The SWITCH TO SEMI-INTGR MODE? prompt appears.
d. Press the key to select YES.
e. When the WELCOME/BONJOUR screen appears, your
terminal is ready to process transactions in Semi-Integrated
mode.