Table Of Contents - Moneris iCT250 Getting Starded Manual

Table of Contents

1 Read this first: Overview procedures ............................................................................. 1
1.1 Required setup components
1.2 Installing the paper roll
1.3 Connecting the terminal-to-host communication cable(s)
1.4 Connecting the terminal-to-ECR communication cable
1.5 Connecting the power supply cable / powering on the terminal
1.6 Enabling Semi-Integrated mode on the terminal
1.7 Configuring terminal-to-host communication parameters
1.7.1 Using Dynamic IP to Communicate with Moneris Test Host
1.7.2 Using Static IP to Communicate with Moneris Test Host
1.7.3 Using Dial to Communicate with Moneris Test Host
1.8 Configuring terminal-to-ECR communication parameters
1.8.1 Terminal Connected to ECR using a USB Cable
1.8.2 Terminal Connected to ECR using an RS232 Serial Cable
1.8.3 Terminal linked to ECR using Ethernet Networking
1.9 First Initialization and Log onto the Moneris Test Host
1.10 Confirming terminal is communicating with the ECR
1.11 Reinitializing and logging onto the Moneris host
1.12 Logging off/Logging onto the Moneris Test Host
1.12.1 Logging off
1.12.2 Logging On
2 Enabling optional features ............................................................................................. 20
2.1 Enabling Cash Transaction Receipt Printing From the Terminal
2.2 Enabling the admin password for manual entry protection
2.3 Enabling Invoice Number Prompting
2.4 Enabling Tip Prompting: Debit/Credit
2.5 Enabling a Default Tip Percentage: Debit/Credit
2.6 Enabling Enhanced Tip Prompting: Debit/Credit
2.7 Changing Print Delay Options
2.8 Enabling Cash Back Prompting: Debit
2.9 Configuring the Cash Back Limit
2.10 Changing the Terminal Language
2
3
4
5
7
8
9
9
11
13
14
14
14
15
16
17
18
19
19
19
20
20
21
21
22
22
23
24
25
25
i