Enabling Semi-Integrated Mode On The Terminal - Moneris iCT250 Getting Starded Manual

1.6 Enabling Semi-Integrated mode on the terminal

To allow the ECR to communicate with the terminal to process transactions, you must enable
Semi-Integrated mode on the terminal.
Note: To scroll down, press the
1. Begin at the TERMINAL SETUP REQUIRED screen.
2. Press the key twice.
The ENTER ADMIN CODE entry screen appears.
3. Key in 53, and press the green
The SEMI-INTEGRATED MODE menu appears.
4. Do one of the following:

To enable receipt printing from the terminal: Scroll down to RCPTS AT TERM, and press
the green key.
 To enable receipt printing from the ECR: Scroll down to RCPTS AT ECR, and
press the green
5. The REINITIALIZATION REQUIRED screen appears.
6. Go back to Read this first: Overview procedures on page 1 (continue at step 6).
8 iPP320 Getting Started Guide for the POSPAD Application
key. To scroll up, press the
key.
key.
key.