Enabling Optional Features; Enabling Cash Transaction Receipt Printing From The Terminal; Enabling The Admin Password For Manual Entry Protection - Moneris iCT250 Getting Starded Manual

2 Enabling optional features

2.1 Enabling Cash Transaction Receipt Printing From
the Terminal
Follow the steps below to configure the terminal to print cash transaction receipts.
Note: This option can only be enabled if you configured the terminal to print transaction receipts in
Semi-Integrated mode.
1. Begin at the WELCOME/BONJOUR screen.
2. Press the key twice.
The ENTER ADMIN CODE entry screen appears.
3. Key in 14 and press the green
The PRINTER CFG menu appears.
4. Scroll up to ECR CASH TRANS, and press the green
5. When the ACCEPT CASH TRANS FROM ECR? prompt appears, press the
6. Press the red key twice to return to the WELCOME/BONJOUR screen.
2.2 Enabling the admin password for manual entry
protection
This parameter protects the manual entry of card information on the terminal keypad. By default,
a POS Admin card (shipped with your terminal) must be swiped any time card information is
manually entered in order to continue the transaction. Moneris recommends that you change
this parameter by setting up an admin password to be entered instead of swiping the POS Admin
card. To change this parameter and set up an admin password, follow the steps below.
1. Decide on your password:
 It must be 5 to 10 numbers.

Do not use consecutive numbers such as 12345 or 98765, or repeating numbers such as
22233.
 You will have 60 seconds to enter it.
2. From the READY screen, press the
3. When SWIPE ADMIN CARD appears, swipe your POS Admin card.
The ENABLE PSWD? prompt appears.
4. Select YES by pressing the
The ENTER NEW 5-10 DIGIT ADMIN PSWD prompt appears.
Note: You have 60 seconds to enter the password.
5. Key in the password you decided on in step 1, and press the green
The RE-ENTER NEW ADMIN PASSWORD prompt appears.
key.
key twice, key in 22, and press the green
key.
key.
key to select YES.
key.
key.
20